EN
Operation
Note! The Battery Pack (1) is protected against short-circuit,
overheating,
protection may automatically shut down the the Battery
Pack (1) if there is a risk.
Switching Battery Pack On/Off
The Battery Pack (1) can equally be switched on/off when inserted/non-
inserted in the Drivepack (7).
To switch on the Battery Pack (1), press the on/off button (2). The LEDs at the
charge-control indicator (3) will show a start-up animation and then shortly
the state-of-charge.
To switch off the Battery Pack (1), press and hold the on/off button (2) for 2 s.
The LEDs at the charge-control indicator (3) will show a shutdown animation
and Battery Pack (1) will switch off.
If your eBike reaches inactivity, your Battery Pack (1) will switch off to save
the remaining energy (see Drivepack Inactivity Instructions). Equally, if
a standalone Battery Pack (1) spends 12 h without being inserted in a
Drivepack (7), connected to a Charger or having its button pushed, it will
switch off to save the remaining energy
38
overcharge
and
deep
discharging.
This