Publicité
Les langues disponibles
Les langues disponibles
BEFORE YOU BEGIN
Introduction
The Speedaire single-stage air compressors are oil lubricated reciprocating compressors.
This air compressor is designed to provide high air delivery where electricity is not available. The pump
supplied with this unit has oil lubricated bearings which causes a small amount of oil carryover to be present
in the compressed air steam. Applications requiring air free of oil and water condensation should have the
appropriate filters installed. Speedaire stationary gasoline engine driven air compressors are mounted on 30
gallon ASME code horizontal tanks. All units are equipped with a belt guard and an idle down control to minimize
fuel consumption. Applications include tire changers, inflation devices, pneumatic tools and controls, nailers and
spraying equipment.
General Purpose Series Models Include:
•
Compressor pump
•
ASME air receiver with safety valve
•
Gas engine
•
Throttle control
Quick Reference
Recommended Oil (2 Options)
Single viscosity SAE 30 ISO100 nondetergent compressor oil. Part number 1WG50 or
4ZF21.
10W30 synthetic oil such as Mobil 1
Oil Capacity
Approximately 8 ounces
UNPACKING
tubes or coolers. Do not use unit to lift other attached equipment.
After unpacking the unit, inspect carefully for any damage that may have occurred during transit. Check for
loose, missing or damaged parts. Check to be sure all supplied accessories are enclosed with the unit. In case of
questions, damaged or missing parts, please call 1-855-504-5678 for customer assistance.
Required Items - Not Included
•
Oil (for both pump and engine)
•
Gas
or 1WG49.
®
Do not lift or move unit without appropriately rated equipment. Be sure
the unit is securely attached to lifting device used. Do not lift unit by holding onto
Do not operate unit if damaged during shipping, handling or use. Damage
may result in bursting and cause injury or property damage.
1
Publicité
