Speedaire 1VW39 Manuel D'utilisation Et De Pièces

Operating Instructions and Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Speedaire
ASME Code Air Tanks
For Warranty & Service call 1-888-606-5587
Do Not Return To Branch
Description
These air tanks are designed to be used as air receivers. The tanks are designed for
a maximum 200 psi. Motor slots are punched into the baseplates for the size motors
listed (the 120 gallon vertical tank does not include a base plate). Model 1VW39 is
suitable as a replacement tank for Speedaire gas engine air compressors 5F564 and
4LW38.
Safety Guidelines
This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.
Danger indicates an
imminently
hazardous situation which, if not
avoided, WILL result in death or serious
injury.
Warning indicates a
potentially
hazardous situation which, if not
avoided, COULD result in death or
serious injury.
Specifications
Model Gal. Type
1VW39 30 Horizontal 7.5 HP, 2 Stage
5Z359A 30 Horizontal 5 HP, 1 Stage and 2 HP, 2 Stage 56, 56H, and 56HZ
5Z363A 30 Vertical
5Z360A 60 Horizontal 5 HP, 2 Stage
5Z364A 60 Vertical
5Z365A 80 Vertical
5Z361A 80 Horizontal 10 HP, 2 Stage
5Z362A 120 Horizontal 10 HP, 2 Stage
4KP88 120 Vertical
Form 5S5978
®
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
information, that if not followed, may
cause damage to equipment.
NOTE: Information that requires special
attention.
Max. Compressor HP
5 HP, 1 Stage and 2 HP, 2 Stage 56, 56H, and 56HZ
5 HP, 2 Stage
7.5 HP, 2 Stage
--
Printed in U.S.A.
02433
0408/111/VCPVP
1VW39,5Z359A thru 5Z365A and 4KP88
Stationary
Caution indicates a Unpacking
potentially
After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit. Make sure
to tighten fittings, bolts, etc., before
Notice indicates
important
putting unit into service.
shipping, handling or use. Damage
could result in bursting and cause
injury or property damage.
Motor Slots
NEMA Frame
--
56, 56H, 56HZ, 145T, and 184T None
56, 56H, 56HZ, 145T, and 184T None
145T and 184T
145T, 184T, and 215T
184T and 215T
--
IN174304AV 5/08
Do not operate tool
if damaged during
Max. Gas No. of Leveling
Eng. HP Legs Required
13 HP 4 Yes
5 HP 4 Yes
None 3 No
4 Yes
3 No
None 3 No
None 4 Yes
None 4 Yes
-- 3 Yes
E
N
G
L
I
S
H
E
S
P
A
Ñ
O
L
F
R
A
N
Ç
A
I
S