Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE AND INSPECTION INSTRUCTIONS (CONTINUED)
Belts
Check belt tension every 3 months. Adjust belt tension to allow 3/8 to 1/2 in. deflection with normal thumb
pressure.
Also, align belts using a straight edge against the face of the flywheel and touching the rim on both sides of the
face. The belts should be parallel to the straight edge, when looking down, to ensure proper alignment of the belt.
Straight
Edge
Flywheel
Figure 10
Maintenance Schedule
Operation
Check Safety Valve
Drain Tank
Check Oil Level
Check Air Filter
Clean Unit Components
Check Belt Tightness
Change Oil (see Figure 5)
NOTE: See engine manual for Maintenance Schedule.
STORAGE
If compressor is to be stored for a short period of time, make sure that it is stored in a normal position and in a
cool protected area. If the unit is to be stored for more than 30 days, the engine should be completely drained of
fuel and oil. See engine manual for storage instructions.
Drain the tank to prevent unexpected movement of the unit.
Daily
Monthly
●
●
●
●
●
3 Months
●
●
13
Publicité
