Sigma RC 1209 Mode D'emploi page 46

5 SETTING mODE
5.1 OPENING THE SETTING mODE
5.2 DISPLAy SETUP
5.3 BUTTON ASSIGNmENT IN SETTING
LIGHT
Press:
Light on
PULSE
Press: Scroll backward
Press and hold:
Scroll continuously
46
Prerequisite: your running computer must first be
in training mode (see section 4.3 "Overview of modes
and functions").
Press and hold the SET button for 3 seconds. When
the display flashes twice, the setting mode is open.
1 st line SET indicates that the setting mode
is open.
3 line/ Submenu or the setting to be
rd
4 line
th changed.
www.sigmasport.com
START/STOP
Press: In calibration
mode, start and stop
the measurement
SET
Press: Select function
Save value
Press and hold: Quit setting
mode (in the calibration
mode, quit calibration)
SPEED
Press: Scroll forward
Press and hold: Scroll
continuously