Sigma RC 1209 Mode D'emploi page 43

4 OVERVIEW
Press and hold the PULSE (-) button.
Press and hold the PULSE (-) button down.
The display will flash twice, indicating that
the training mode is closed.
The sleep mode is displayed.
Release the PULSE (-) button.
4.4 OVERVIEW OF mODES AND FUNCTIONS
There are three main modes to the Running Computer. (Sleep mode,
training mode, setting mode). Switching between these modes requires
that you press and hold a button for 3 seconds.
Press and hold one of the buttons
Sleep mode
Training mode
Press and
hold
Press and hold
Press and
hold
Setting mode
43