Publicité
Les langues disponibles
Les langues disponibles
Bombas Ideal, S.A.
3.-IDENTIFICATION
Vertical pumps have a metal plate on the bearing support on which the following data is stated:
TYPE: identification of the pump model.
Nº : manufacturing number.
RPM : speed
When a specific working point, flow & head, is specified in the contract or order, the following details will
appear on the plate :
Q (m
H (m) : manometric head in metres.
4.- GUARANTEE
Pumps from Bombas Ideal S.A., have a guarantee period of 12 months from delivery date, against any flaw
in materials and manufacture, according to the general sales terms.
Failure to comply with the suggestions and recommendations in this manual, as well as any improper use
or non-authorised handling of the product, will completely invalidate the guarantee.
The guarantee excludes wear and tear through use, improper use, repair or replacement of the faulty part
by the user or by unqualified staff without the express consent of Bombas Ideal S.A.
5.- RECEPTION OF THE GOODS
On reception of the goods please check that:
The packaging has not undergone any damage during transport. Otherwise immediately make the relevant
claim to the forwarder.
The material supplied coincides with the order specifications.
The material has not undergone any damage during transport.
The Technical Manual is included with the material.
TAKE NOTE
Bombas Ideal S.A. should immediately be informed of any anomaly found
Carefully unpack and clean all the parts concerned prior to assembly (this shall particularly apply to all the
threads and all the areas subject to friction or rotation)
Where the materials have to be stored for any length of time, they shall be necessarily protected and kept
under control in order to avoid any undue damages prior to storage.
6.- STORAGE
The pumps should be stored in well-ventilated zones free of damp.
For short storage periods the machined parts should be protected with an oil or anti-corrosion product.
If the pump is to be left for longer periods in the store, precautions should be taken to prevent the pump
from corroding by using an anti-corrosion product, also proceeding to cover up the suction and delivery
flanges. Turn the shaft by hand every 15 days to prevent any possible seizing up.
TAKE NOTE
Make sure that the diesel engine or electric motor is not exposed to atmospheric agents
not compatible with its degree of protection which might cause damage to this.
Before storing a pump, which has recently been installed, proceed to clean and then air-dry it (do not used
hydrocarbon/oil based products).
3
/ h) : flow in cubic metres per hour.
12
Publicité
