AND UA-651CNBLE Manuel D'instructions page 14

USING THE MONITOR
Transmitting Temporarily Stored Data
In cases when the receiver device cannot receive measurement data,
the measurement data is temporarily stored in the monitor memory.
The data stored in the memory is transmitted the next time a
connection is successfully made to the receiver device. A total of 30 sets
of measurement data can be stored. When the amount of data exceeds
30 sets, the oldest data is deleted and the new data is stored. The
amount of data that can be stored temporarily may vary with the
application.
Time
This monitor has a built-in clock. The date and time a measurement
was taken is included in the measurement data.
The built-in clock is designed to be automatically adjusted by syncing
with the clock of a receiver device. Refer to the specifications of the
receiver device.
This monitor has no clock adjustment function.
Selecting the correct cuff
Using the correct cuff size is important for an accurate reading. If the
cuff is not the proper size, the reading may yield an incorrect blood
pressure value.
The arm size is printed on each cuff.
The index and proper fit range, on the cuff, tell you if you are
applying the correct cuff. Refer to "Symbols printed on the cuff".
If the index points outside of the range, contact your local dealer to
purchase a replacement cuff.
The cuff is a consumable. If it becomes worn, purchase a new one.
E-13
A&D Medical (Toll-Free): 1-888-726-9966