Pages - Teddington CS830 Serie Manuel Technique

CS
21.3.1

Pages

1)
2)
3)
-
-
-
67
In machines provide with three way valve installed its activation are visualize with 3WV written 3WV on the
display:
Warning: The activations of the three way valve force the internal fan too.
MAIN PAGE: is the stand-by page. After 5 minutes from the last button press the display will automatically come
back to the MAIN PAGE.
Is possible to come back to MAIN PAGE just pressing, from every screen, RETURN button. By pressing↓ from
main page are visualized the other, in order: Shows the temperature and humidity set. The can be modify by
pressing ENTER, then the buttons ↑↓ to change the values, and ENTER again to save the change:
PROBE PAGE: shows the values of air inlet temperature, humidity and condensing temperature read by the
probes:
ENABLE PAGE: shows and allow to change kind and status of the enabling. The kind of the enable and the
enabling by display can be set pressing ENTER and then button ↑↓ to change the values and then ENTER
again to save:
DIS: Enable by display;
RC: Enable by remote control ;
BMS: Enable by modbus;
Warning: The compressor will not starts until the machine will not be enable.
M.CS830-00 ITA-ENG 08/11/2021
ITA