Generalities - Teddington CS830 Serie Manuel Technique

CS
19.5

Generalities

Power supply Control circuit
Model
V/ph/Hz V/~/Hz
CS 400/3~/50 24/1~/50
Warning: Before any operation on the electrical section, make sure that the power supply is disconnected.
Warning: The main power supply must be protected with a differential switch.
FR
Warning: A main switch must be present near the unit. Complete compliance with the rules concerning electrical
installations and installations must be guaranteed.
Check that the supply voltage corresponds to the nominal data of the unit (voltage, frequency) shown on the plate
on the machine.
The power connection is via a plug with a more neutral three-pole cable and earth.
Warning: Voltage fluctuations must not exceed ± 5% of the nominal value. If these tolerances are not observed,
please contact our Studio to provide adequate devices.
Warning: The power supply must comply with the quoted limits: otherwise the warranty will be void immediately.
Warning: Grounding is mandatory.
62
M.CS830-00 ITA-ENG 08/11/2021