Control Temperature Version (Tcr); Hot Water Coil Version; Predisposition Pump Version; Preliminar Operations - Teddington CS830 Serie Manuel Technique

CS
18.1.3
18.1.4
18.1.5
19
19.1
19.2
19.3
•
19.4
61

Control temperature version (TCR)

These machine are equipped with external remote condenser that is connected with the dehumidifier. The use of
the remote condenser allows the control of the temperature and humidity at the same time, operating in cooling
or dehumidifying mode. In order to use both functions, it's necessary to have a thermostat and an hygrostat.
The regulation can be ON/OFF or modulating.

Hot water coil version

in these machines a hot water coil is installed, after the condenser. If in the coild hot water at 70°C is pumped in,
the coil gives about 10-12kW depending on the model installed (inlet air at the hot water coil 35°C) of heating
power with a loss of pressure of about 20 kPa. Predisposition pump version

Predisposition pump version

These machine are equipped with a predisposition for the connection of a lift pump for the relaunch of the moisture.
The machine is provided with a socket for the pump's connection between pump and machine.

Preliminar operations

Packaging removal

Remove the packaging taking care not to damage the unit. Dispose of the packaging products (wood, plastic,
cardboard) and send them to specialized collection or recycling centers (follow local regulations in force).

Inspection

All units are assembled and wired at the factory. Upon receipt of the machine, it must be inspected immediately,
carefully checking that it has not been damaged during transport or that there are no missing parts; any complaints
must be notified to the carrier and the factory or his representative within 8 days.

Positioning

The following points must be taken into account to determine the most suitable location for installing the unit:
Place the machine in order to guarantee an adequate air flow.
Warning: Make sure the machine is positioned so that it does not come into contact with water.

Service area

The hot air expelled by the fans must not find obstacles.
Avoid phenomena of recirculation of the hot air between suction and delivery, otherwise the performance of
the unit will deteriorate or even the normal operation will be interrupted.
Warning: The machine must not be placed in confined spaces, which do not allow adequate diffusion in the room
of the air coming from the front grill.
Warning: Do not place or hang objects on the front panel, it may cause damage to the unit.
M.CS830-00 ITA-ENG 08/11/2021
ITA