Technical Specifications - Metrix AX 1360P Notice De Fonctionnement

Technical Specifications

Output ratings
Constant voltage
operation
Constant current
operation
Tracking parallel
operation
Tracking serial
operation
CH3 output
Display
Protection
Insulation
Operation
environment
Storage
environment
Power source
VII - 52
CH1/CH2 independent: 0 ~ 30 V, 0 ~ 3 A
CH1/CH2 serial:
CH1/CH2 parallel:
CH3:
Line regulation:
Load regulation:
Recovery time:
Ripple & Noise:
Temp.co-efficient:
Line regulation:
Load regulation: ≤ 0.2 % + 3 mA
Rippe & Noise:
Line regulation:
Load regulation: ≤ 0.01 % + 5 mV
Tracking error:
Line regulation:
Load regulation: ≤ 300 mV
Positive and negative supply: Slave tracking error: ≤ 0.5 % + 10 mV of the
master (No load. With load, add load regulation ≤ 300 mV)
Line regulation:
Load regulation: ≤ 25 mV
Ripple & Noise:
Output voltage:
Output current:
Ammeter:
Voltmeter:
Voltmeter resolution: 100 mV
Ammeter resolution:
Programming accuracy: ±(0.5 % of reading + 2D), ±(0.5 % of reading + 2D)
Readback accuracy: ±(0.5 % of reading + 2D), ±(0.5 % of reading + 2D)
Over voltage, over current, over load, over temperature, current limit, short
circuit and reverser polarity protections.
Between base and output terminal ≥ 20 MΩ / 500 VDC
Between base and power cord
Indoor use
Altitude:
Ambient temperature: 0 ~ 40°
Relative humidity:
Installation category:
Pollution degree:
Ambient temperature: -10 ~ 70°
Relative humidity:
AC 110 V / 220 V ± 10 %, 50 / 60 Hz, 500 VA- CAT II
0 ~ 60 V, 0 ~ 3 A
0 ~ 30 V, 0 ~ 6 A
2.5 V / 3.3 V / 5 V, 3 A
≤ 0.01 % + 3 mV
≤ 0.01 % + 3 mV
≤ 100 us (50 % load change, minimum load 0.5 A)
≤ 1 mVrms
≤ 300 ppm
≤ 0.2 % + 3 mA
≤ 3 mArms
≤ 0.1 % + 3 mV
≤ 0.05 % + 50 mV of Master (no load)
≤ 0.01 % + 5 mV
≤ 25 mV
≤ 2 mV rms
2.5 V, 3.3 V, 5 V (selectable), ± 8 %
3 A
3.20 A full scale, 3 D 0.5" LED display
32.0 V full scale, 3 D 0.5" LED display
10 mA
≥ 30 MΩ/ 500 VDC
≤ 2000m
≤ 80 %
II
2
≤ 70 %
Technical Specifications
DC Power Supply