Error Messages; Command List - Metrix AX 1360P Notice De Fonctionnement

Remote Control (contd.)

Error Messages

Program mnemonic
too long
Invalid character
Too many digits
Missing parameter
Data out of range
Command not
allowed
Undefined header

Command list

ISET<X>:<NR2>
ISET<X>
VSET<X>:<NR2>
VSET
IOUT<X>
VOUT<X>
TRACK<NR1>
BEEP<BOOLEAN>
LOCK<BOOLEAN>
OUT<BOOLEAN>
SATATUS
IDN
RCL<NR1>
SAVE<NR1>
HELP
VI - 48
The following error messages might appear when the instrument cannot
accept the command.
The command length must be 12 characters or less.
Invalid characters, such as symbols, are entered. Example: VOUT#
The command exceeded the maximum number of decimals: 3 digits.
The parameter is missing from the command. Example: VSET:
(should have a number)
The entered value exceeds the specification. Example: VSET:33
(should be : 32 V)
The entered command is not allowed in the circumstance. Example: trying
to set CH2 output while in the tracking mode.
The entered command does not exist, or the syntax is wrong.
Detailed descriptions of each command starts from the next page.
The "HELP" command shows all the following commands and their
meanings, except for the HELP command itself.
Sets the output current
Retuns the output current setting
Sets the output voltage
Returns the output voltage setting
Returns the actual output current
Returns the actual output voltage
Selects the operation mode
Turn on or off the output
Turn on or off the front panel lock
Turn on or off the output
Returns the MODEL status
Returns the MODEL identification
Recalls a panel setting
Saves the panel setting
Shows the command list
Remote Control
DC Power Supply