For Command Help - Metrix AX 1360P Notice De Fonctionnement

Remote Control
Remote Control (contd.)
Contents for
Command Help
ISET<x>:<NR2>
VSET<x>:<NR2>
TRACK<NR1>
BEEP<Boolean>
LOCK<Boolean>
OUT<Boolean>
bit0:(CH1)0=CC,1=CV
bit1:(CH2)0=CC,1=CV
bit23:(TRACK)10=DEP,
11=SER,01=PAR
bit4:(BEEP)0=OFF,1=ON
bit5:(LOCK)0=LOCK,1=UNLOCK
bit6:(OUT)0=OFF,1=ON
NR0: 1=Memory1, 2=Memory2,
3=Memory3, 4=Memory4;
DC Power Supply
Sets the value of current.
Sets the value of voltage. X: 1=CH1, 2=CH2.
ISET<x> Return the value of current.
VSET<x> Return the value of voltage.
IOUT<x> Returns actual output current.
Returns actual output voltage.
VOUT<x>
Sets the output of the power supply working on independent or
tracking mode. NR1: 0=INDE, 1=SER, 2=PARA.
Sets the BEEP state on or off.
Sets the entry-key lock state on or off.
Sets the output state on or off
STATUS Returns the power supply state.
Returns instrument identification.
IDN
RCL<NR0> Recall the setting data from the memory which previous saved.
SAV<NR0> Saves the setting data to memory.
VI - 51