Remote Control; Remote Control Setup; Command Syntax - Metrix AX 1360P Notice De Fonctionnement

Remote Control

Remote Control
Remote Control
Setup
Background
Interface
COM setting
Functionality
check

Command Syntax

Command format
Output channel
Output channel
DC Power Supply
The front panel settings can be recalled from one of the four internal
memories.
USB slave port, rear panel
Set up the COM port inside the PC according to the following list:
Baud rate: 9600
Parity bit: None
Data bit: 8
Stop bit: 1
Data flow control: None
Run this query command via the terminal application such as MTTTY
(Multi-threaded TTY).
*idn?
This should return the identification information:
Manufacturer, model name, serial number.
Drivers for LV / LW programming are available on our website.
Type
<Boolean>
<NR1>
<NR2>
1 (CH1) or 2 (CH2)
Commands must be capital letters
1: command header
2: output channel
3: separator
4: parameter
Description
Boolean logi
Integers
Decimal numbers
Example
0 (off), 1 (on)
0, 1, 2, 3
0.1, 3.14, 8.5
VI - 47