Command Details - Metrix AX 1360P Notice De Fonctionnement

Remote Control
Remote Control (contd.)

Command details

Command ISET<X>:<NR2>
Description Sets the output current.
Panel operation Refer to p. 11
Response time Min.70ms
Example ISET1:2.234
Sets the CH1 output current to
2.234A,
Command VSET<X>:<NR2>
Description Sets the output voltage.
Panel operation Refer to p. 11
Response time Min.70ms
Example VSET1:20.345
Sets the CH1 voltage to
20.345V.
Command IOUT<X>
Description Returns the actual output
current.
Response time Min.80ms
Example IOUT1
Returns the CH1 output current.
Command TRACK<NR1>
Description Selects the operation mode:
INDEP, tracking SER, tracking
PAR
Panel operation Refer to p. 11
NR1 0: Independent
1: Tracking serial
2: Tracking parallel
Response time Min.70ms
Example TRACK0
Selects the independent mode.
DC Power Supply
Command ISET<X>
Description Returns the output current
setting
Response time Min.70ms
Example ISET1
Returns CH1 output current
setting.
Command VSET<X>
Description Returns the output voltage
setting.
Response time Min.80ms
Example VSET1
Returns the CH1 voltage
setting.
Command VOUT<X>
Description Returns the actual output
voltage.
Response time Min.70ms
Example VOUT1
Returns the CH1 output
voltage.
Command BEEP<Boolean>
Description Turns on or off the beeper.
Panel operation Refer to page 10
Response time Min.70ms
Example BEEP1
Turns on the beeper/
Command OUT<Boolean>
Description Turns on or off the output.
Panel operation Refer to p. 5
Response time Min.70ms
Example OUT1
Turns on the output.
VI - 49