Metrix AX 1360P Notice De Fonctionnement page 45

Operation
Operation (contd.)
Voltage level
Current level
3.2 Tracking serial
with common
terminal
Output rating
Panel operation
DC Power Supply
Double the reading on the CH1 Voltage meter. In the above case, the actual
output is 20.0 x 2= 40.0V.
CH1 meter reading shows the output Current. In the above case, 2.000A.
(CH2 Current control must be in the Maximum position=3.0A).
0 ~ 60 V / 0 ~ 3 A for CH1 ~ COM
5. To turn on the output, press the output key.
The key LED turns on.
6. Refer to the CH1 (Master) meter and indicator
for the output setting level and CV/CC status
1. Press the SER/INDEP key to activate the
tracking serial mode. The key LED turns on.
2. Connect the load to the front panel terminals,
CH1+/- & CH2-. Use the CH1 (-) terminal as
the common line connection.
3. Connect the load to the front panel terminals,
CH1+/- & CH2-. Use the CH1 (-) terminal as
the common line connection.
IV - 43