Output On/Off; Beep On/Off; Front Panel Lock - Metrix AX 1360P Notice De Fonctionnement

Setup
Setup (contd.)
Output ON / OFF
Panel operation
Automatic
output off
Beep ON / OFF
Panel operation
List of beeper

Front Panel Lock

Panel Operation
DC Power Supply
Pressing the
The key LED also turns on. Pressing the Output key again turns off the
output and the key LED.
Any of the following actions during output on automatically turns it off.
They might involve sudden change in the output level.
•
Change the operation mode between independent / tracking series /
tracking parallel
•
Recalling other setups from the memory
Storing the setup into the memory
By default, the beeper sound is enabled. To turn off the beep,
press the beep key for 2 seconds.
A beep sound comes out and the beeper setting will be turned off. To enable
the beeper, press the beep key again for 2 seconds.
The following operations go with a beep sound when the beeper setting is on.
•
Power on
•
INDEP – SER – PAR mode switching
•
Setup save/recall
•
Voltage/current knob, fine/coarse knob
•

Output on/off

•
Panel lock/unlock
•
CH1/CH2 output level knob
•
Voltage/current level reaching minimum and maximum (zero) level
Press the LOCK key to lock the front panel key
operation.
The key LED turns on. To unlock, press the LOCK key for 2 seconds.
The key LED also turns off.
The OUTPUT key is not affected by the lock operation.
Output key turns on all CH 1/2/3 outputs.
III - 39