General Safety - Altrad Belle MEGAVIB+ Manuel De L'opérateur

GB
safety information. It is the responsibility of the operator to ensure that he/she fully understands how to operate this equipment safely.
CAUTION
Work Area
KEEP your work area clean and well lit. Cluttered benches and dark areas invite accidents.
DO NOT OPERATE
Power tools create sparks wich may ignite the dust or fumes.
KEEP
Electrical Safety
EARTHED TOOLS MUST BE PLUGGED INTO an outlet properly installed and grounded in accordance with all codes and ordinances.
NEVER REMOVE the grounding prong or modify the plug in any away.
DO NOT USE any adaptor plugs.
CHECK
AVOID
electric shock if your body is grounded.
DON'T EXPOSE power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
DO NOT ABUSE the cord.
NEVER USE the cord to carry the tool.
NEVER PULL the plug from an outlet.
KEEP
REPLACE damaged cords immediately. Damaged cords increase the risk of electric shock.
WHEN OPERATING
outdoor use and reduce the risk of electric shock.
Service
MUST BE PERFORMED
USE only identical replacement parts.
FOLLOW instructions in the Maintenance section of this manual.
Personal Safety
STAY ALERT
DO NOT USE TOOL
power tools may result in serious personal injury.
DRESS PROPERLY.
AVOID accidental starting.
BE SURE
invites accidents.
REMOVE
may result in personal injury.
DO NOT overreach.
KEEP proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected
situations.
USE safety equipment.
Tool Use And Care
DO NOT FORCE the tool.
USE the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.
DO NOT USE
repaired.
DISCONNECT
preventive safety measures reduce the risk of starting the tool accidentally.
STORE idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.
CHECK
USE
may become hazardous when used on another tool.

General Safety

Improper maintenance can be hazardous. Read and Understand this section before you perform any
maintenance, service or repairs.
16