Electrolux WTGL3VI300 Notice D'utilisation page 107

ENGLISH 43
1. Open the pump cover.
2
1
2. Place a suitable bowl below the drain pump
access to collect the water that flows out.
Always keep a rag nearby to dry up any water
spillages when removing the filter.
180˚
3. Turn the filter 180 degrees in anti-clockwise
direction to open it, without removing. Let the
water flow out.
4. When the bowl is full of water, turn the filter
back and empty the container.
5. Repeat the steps 4 and 5 until the water
stops to flow out.
6. Turn the filter anti-clockwise to remove it
1
2