Rechargeable Battery Programmes - VOLTCRAFT 1403321 Mode D'emploi

8. RECHARGEABLE BATTERY PROGRAMMES

In addition to the charging programme, the charger also permits rechargeable battery main-
tenance and can perform a power test. This permits good estimation of the condition of the
individual rechargeable batteries.
The rechargeable battery programmes can be selected manually in advance or after insertion
of the rechargeable batteries.
To set rechargeable battery programmes in advance, keep the "MODE" button pushed for
approx. 2 seconds. The mode display "5a" will start to flash for all 4 charging slots.
Push the "MODE" button to select the rechargeable battery programme. The programme
display will change every time the button is pushed:
CHARGE, DISCHARGE, DISCHARGE REFRESH, CHARGE TEST, QUICK TEST, etc.
If you want to set a single charging slot, select the desired charging slot during the setting
phase (flashing display) with the "SLOT" button until only this display is flashing. The "MODE"
button selects the programme for this slot only.
To select the rechargeable battery programme after inserting the rechargeable battery, push
the "MODE" immediately after it. The programme display will change every time the button is
pushed:
CHARGE, DISCHARGE, DISCHARGE REFRESH, CHARGE TEST, QUICK TEST, etc.
The following programmes are available:
Charging programme "CHARGE"
The charging programme is always present after activation. The inserted rechargeable battery
is charged and the device switches to maintenance charge after the end of charging NiCd/
NiMH rechargeable batteries. The charged capacity is displayed in "mAh".
For Lithium rechargeable batteries, the cell voltage is monitored. When the fixed value is
undercut, recharging will be performed automatically. The end of charging is displayed with
"FuLL".
31