Placing Burner Caps; Checking Burner Cap Placement - Gaggenau CG 280 210CA Guide D'utilisation Et D'entretien

To prevent flare-ups and avoid
WARNING:
creation of harmful by-products, do not use the
cooktop without all burner caps and all burner
grates properly positioned.
To prevent burns, do not touch
WARNING:
burner caps or grates while hot. Turn the
cooktop off and allow the burners to cool.

Placing Burner Caps

Each cap has a letter (A, D, or F) cast in the underside
of the cap that corresponds to a letter (A, D, or F) cast
in the burner base that is attached to the appliance.
Place each burner cap on its correct burner base
per its corresponding letter designation. See
figure below.
Place burner cap gently on top of base so that the
prongs of the burner base fit snugly into the
groove of the burner cap.
Burner Base
Matching letter
designation
Burner Cap

Checking Burner Cap Placement

Check to make sure there is not gap between the
burner cap and burner base.
Cap Placement to see the correct and incorrect
placements of the burner cap.
10
Figure 2: Burners Caps
See figure Burner
You may gently try to move the burner cap from
side to side to check if it is properly placed. If
properly placed, the cap will click from side to
side as the prongs hit the groove ridge.
Correct Burner Cap Placement
Incorrect Burner Cap Placement
Figure 3: Burner Cap Placement