Getting Started
Before Using the Appliance for the
First Time
Remove all packing materials and literature from
the cooktop surface.
While cool, wipe with a clean, damp sponge and
dry.
Parts and Accessories Included
1
Left front surface burner (9,100 BTUs)
Left rear surface burner (5,500 BTUs)
2
3
Center surface burner (18,000 BTUs)
Right rear surface burner (9,100 BTUs)
4
Right front surface burner (5,500 BTUs)
5
Sealed Burners
Your new cooktop has sealed gas burners. There are
no burner parts under the cooktop to clean,
disassemble or adjust. Your cooktop has three
different burner sizes; small, medium, and large.
Match the corresponding letters on the burner cap
and burner base.
See "Burner Cap Placement" on
page 10
.
There may be a slight odor during the first several
uses; this is normal and will disappear.
Optimum cooking results depend on the proper
cookware being selected and used. (
"Choosing Cookware - Cookware
Recommendations" on page 13
Read all safety precautions and Use and Care
Manual information prior to operating.
Burner Caps
The burner cap is porcelainized steel. The burner
caps must be properly placed for the cooktop to
function properly. If the burner cap is not properly
placed, one or more of the following problems may
occur:
Burner flames are too high.
Flames shoot out of burners.
Burners do not ignite.
Burner flames light unevenly.
Burner emits gas odor.
See
.)
Figure 1: Model CG280210CA
9