en-us
Getting to know your appliance
Special accessories
You can order the following accessories from your
specialist retailer:
VA 420 000
Connection strip for combination with
other Vario appliances in the 400 series
for flush installation
VA 420 001
Connection strip for combination with
other Vario appliances in the 400 series
for flush installation with appliance
cover/compensation strip
VA 420 010
Connection strip for combination with
other Vario appliances in the 400 series
for surface-mounted installation
VA 420 011
Connection strip for combination with
other Vario appliances in the 400 series
for surface-mounted installation with
appliance cover/compensation strip
VA 450 401
Appliance extension 15" (38 cm)
Use the accessories only as indicated. The manufacturer
assumes no liability for incorrect usage of the
accessories.
16
Operating the appliance
This chapter explains how to set a cooking position. The
table shows heat settings and cooking times for various
meals.
Setting a Burner
Use the control knob to select the heat setting you
require.
0
Burner off.
Heat setting 1
Lowest setting
Heat setting 12
Highest setting
Selecting a Heat Setting
Push in the control knob and turn it to the heat setting
you require.
The selected heat setting will be lit on the burner display.
The illuminated ring around the control knob will be lit.
Switching Off the Burner
Turn the control knob to the 0 position.
The residual heat indicator will be lit, and the illuminated
ring around the control knob will flash until the burner
has cooled down.
Note: If there is no cookware on the burner or if the
cookware is not detected, the selected heat setting will
flash and the illuminated ring around the control knob will
be lit orange. After approx. 9 minutes, the burner will
switch off.
In this case, the illuminated ring around the control knob
will flash. Turn the control knob back to position 0; the
illuminated ring will stop flashing.