Specifications - C2Dx 0295-001-000 Manuel

EN

Specifications

Model:
Dimensions:
Mass:
Degree of Accuracy:
Power Supply:
Battery Life:
Leakage Current:
Equipment Type:
Mode of Operation:
Applied Part(s):
Ingress Protection:
Product Safety
Certification:
Environmental Conditions:
Temperature Limitation:
Humidity Limitation:
Atmospheric Pressure
Limitation:
10
REF 0295-001-000 Pressure Monitor and Battery
117.5 mm x 65 mm x 36.74 mm
150 grams (with battery)
+/- 3.4 mmHg
Internally Powered
9 V (Direct Current) Operation: Standard 9 V
48 hours continuous operation minimum
Current: <= 100 µA Normal Conditions
<= 300 µA Single Fault Conditions
Type BF Applied Part
Continuous Operation
The entire Intra-Compartmental Pressure Monitor System device as defined by the manufacturer. See the Product
Safety Certification standards listed below.
IPX0 Ordinary Equipment
CSA International
International Electrotechnical Commission
IEC 60601-1:1988, Medical Electrical Equipment — Part 1: General Requirements for Safety - Second Edition
Amendment 1 (1991); Amendment 2 (1995); Corrigendum 1 (1995)
Canadian Standards Association
CAN/CSA-C22.2 No. 601.1-M90, Medical Electrical Equipment — Part 1: General Requirements for Safety
CAN/CSA C22.2 No. 601.1S1-94-M94, Supplement No. 1-94 to 601.1-M90
Underwriters Laboratories
UL 2601, Medical Electrical Equipment
Operation
Alkaline Battery
Storage and Transportation
0295-001-072 Rev-1
www.c2dxinc.com