Connecting The Liquid Propane Cylinder; Disconnecting The Liquid Propane Cylinder - Pit Boss PB200P Instructions D'installation

INSTALLATION INSTRUCTIONS

CONNECTING THE LIQUID PROPANE CYLINDER

To connect the Liquid Propane gas supply cylinder:
• The cylinder valve should be in the "OFF" position. If not, turn the valve
clockwise until it stops.
• Make sure the cylinder valve has the proper type-1 external male thread
connections per ANSI z21.81.
• Make sure the burner valves are in the "OFF" position.
• Inspect the valve connections, port and regulator assembly. Remove debris and
inspect the hose for damage.
• When connecting the regulator assembly to the valve, use your hand to tighten
the nut clockwise until it stops. Use of a wrench could damage the quick
coupling nut and result in a hazardous situation.
• Before lighting the grill, use a soap and water solution to check all the
connections for leaks.
• If a leak is found, turn the cylinder valve "OFF" and do not use the grill until a
local Liquid Propane dealer can make repairs.

DISCONNECTING THE LIQUID PROPANE CYLINDER

• Turn the grill burner valves "OFF" and make sure the grill is cool.
• Turn the Liquid Propane cylinder valve "OFF" by turning clockwise until it stops.
• Detach the regulator assembly from the cylinder valve by turning the quick
coupling nut counterclockwise.
• Place dust cap on cylinder valve outlet whenever the cylinder is not in use.
Only install the type of dust cap on the cylinder valve outlet that is provided
with the cylinder valve. Other types of caps or plugs may result in leakage of
propane.
11