Mounting The Flat Screen; Flat Screens With Flat Back - Goobay EasyFix Invisible L Mode D'emploi

User manual
Fig. 5: Wall mounting
1. Before drilling, attend to live cables or other lines lying behind plaster, and
do not damage them.
2. Use a spirit level to mark the drill holes on the wall.
3. Drill the holes with a 10mm concrete drill 60mm deep.
Make sure that you use at least 2 attachment points per side. One of them must
be in the upper and one in the lower slot of each side.
4. Plug a concrete anchor (W-B) in each drilling hole.
5. Mount the wall mount (A) by using the wall screws (W-A) and washers
(W-C).
Make sure that the arrow is pointing up.
4.3 Mounting the flat screen
Tab. 16: Mounting the flat screen
4.3.1 F lat screens with flat back
20
63474
Risk of injury by tripping and falling
>> Place, transport and install product, parts
and acceories in a safe way.
Risk of material damage by improper
procedure
>> Only use moderate force when tightening
the screws in order to avoid damaging
threads.
>> NEVER set the screen on the front during
installation!
>> Do not damage the flat screen by too
long screws.
63475