Mounting The Flat Screen - Goobay TV EasyFold L Mode D'emploi

User's Manual
Fig. 10: Aligning and marking
Fig. 11: Drilling drill holes
Fig. 12: Wall mounting
4.3 Mounting the flat screen
Warning level
Tab. 18: Mounting the flat screen
22
safety instruction
Risk of injury by tripping and falling
>> Place, transport and install product, parts
and acceories in a safe way.
Risk of material damage by improper
procedure
>> Only use moderate force when tightening
the screws in order to avoid damaging
threads.
>> NEVER set the screen on the front during
installation!
>> Do not damage the flat screen by too
long screws.
1. B efore drilling, attend to live
cables or other lines lying
b ehind plaster, and do not
damage them.
2. Use a spirit level to mark the
drill holes on the wall.
3. Mark the drill holes 1 to 6 with
a pencil.
Use the wall plate (A) as template.
4. D rill the drill holes with a
10mm concrete drill 60mm
deep.
5. P lug a concrete anchor (W-B)
in each drilling hole.
6. A ttach the TV wall bracket (A)
w ith the wall screws (W-A) and
w ashers (W-C) in a way, that
the arrow is pointing up.
Bid / Ban