Mounting The Flat Screen; Attaching The Flat Screen - Goobay 63478 Mode D'emploi

User's Manual
M-I
Fig. 4: Drilling the holes
1. Before drilling, attend to live cables or other lines lying behind plaster, and
do not damage them.
2. Select the wall mount distance X according the size of your flat screen.
3. Check with a spirit level that the marked distance X is exactly horizontal.
4. Drill the holes with a 10 mm concrete drill 60 mm deep.
5. Plug a concrete anchor (M-J) in each drilling hole.
6. Mount the wall mounts (A) by using the wall screws (M-I) and washers (M-K).
4.3 Mounting the flat screen
Risk of injury by tripping and falling
>> Place, transport and install product, parts
and accessories in a safe way.
Risk of material damage by improper
procedure
>> Only use moderate force when tightening
the screws in order to avoid damaging
threads.
>> NEVER set the screen on the front during
installation!
>> Do not damage the flat screen by too
long screws.
Tab. 16: Mounting the flat screen
20
63478_V4.indd 20-21
M-J
M-K
A
C
1
M- H
1
M-F
M-H
Fig. 5:

Mounting the flat screen

1. L ean the flat screen vertically on a soft, large surface or a wall and protect it
of scratches and overturning.
2. M ount the adapter brackets (B) at the top side of your flat screen by using
fitting washers and screws like shown.
3. Install the supporting spacers (C) at that bottom side of your flat screen.
4.4 Attaching the flat screen
Risk of injury by tripping and falling
>> Place, transport and install product, parts
and accessories in a safe way.
>> When working with burdens, secure your-
self and the working place, let a second
person help you.
Risk of material damage by inappropri-
ate ambient conditions
>> Keep enough space around product and
to the whole system to ensure proper
ventilation and mobility.
Tab. 17: Attaching the flat screen
M-A/M-B/M-C
M-E/M-F
M-A/M-B/M- C
M-E/M- F
M-D M- D
M-D
2 3
M-F M- F
M- F
M- G
M-G
M-H
M- H
M-D M- D M- D
3
2
M-F M- F
M- G
M- G
M- H
M- H
28.05.2018 15:03:52
21