Leggett & Platt performance Queen Manuel Du Propriétaire page 8

STEP 2
Remove the hardware box. Cut the zip-tie and
remove the mattress retainer.
STEP 3
Install (4) legs into the base frame. Simply screw each leg
into a tapped hole at the corner of the base frame (FIGURE
2). Insert casters into the bottom of each bed leg.
FIGURE 2
CASTERS – PRESS-FIT
INTO BOTTOM OF LEGS
(IF APPLICABLE)
STEP 4
Carefully lift the adjustable base from the shipping carton,
keeping the unit top-side-down. Remove and extend out
power cord from the protective packaging.
WARNING WARNING
POWER CORDS MUST NOT INTERFERE WITH
ANY ADJUSTABLE BASE MECHANISMS.
8
Performance Models Signature Owners Manual 99301468-b
INSTALLATION INSTALLATION
LEGS – SCREW INTO
TAPPED HOLE AT
EACH CORNER
WARNING WARNING
AT LEAST TWO PEOPLE ARE
RECOMMENDED FOR HANDLING AND
MOVING ADJUSTABLE BASE.
CAUTION CAUTION
CAUTION
DO NOT ATTEMPT TO SCREW
LEGS INTO ANY OTHER INSERTS.
THIS WILL DAMAGE PRODUCT.