Leggett & Platt performance Queen Manuel Du Propriétaire page 15

g. When installing a headboard, footboard, or four-piece surround (case
good), allow for 1.5 inches (38.1mm) to 2 inches (50.8mm) of
clearance at the head and foot of the bed and a minimum of ½ inch
to ¾ inch on the sides.
h. Firmly tighten the 3 inch carriage bolts of both headboard bracket
channels.
i. Measure the distance (center-to-center) between the mounting holes
in the headboard.
j. Measure the center-to-center distance between the mounting slots of
the headboard bracket flanges.
k. If bracket flange adjustment is required to accept the headboard,
remove the 1 inch headboard bracket flange bolts and move flanges
side-to-side for the adjustment. Reinstall bolts and tighten.
l. Install headboard.
STEP 11
Install mattress on adjustable base.
Typical Signature adjustable base installation is now complete.
INSTALLATION
Performance Models Signature Owners Manual 99301468-b
15