SICK T4000 Notice D'instructions page 178

7
Chapter
Note
178
© SICK AG • Industrial Safety Systems • Germany • Subject to change without notice
Technical data
Parameter
Response range for centre
1)
offset m = 0
(evaluation device T4000-
1RBB01 with T4000-1KBB)
Line length l = 0 to 25 m
– Safe switch-off distance S
– Switch-on distance
– Safe switch-on distance S
– Differential hysteresis
Line length l 25 to 50 m
– Safe switch-off distance S
– Switch-on distance
– Safe switch-on distance S
– Differential hysteresis
Power supply
Connection sensor
T4000-DNA..P
Line length sensor
T4000-DNA..P
Connection sensor
T4000-DNAC
Line length T4000-DNAC
Connection sensor T4000-
DNBC
Line length T4000-DNBC
T4000-1RBB01 series evaluation devices are only
allowed to be used in conjunction with the T4000-
DNBC sensors and the T4000-1KBB actuators.
1)
These values apply for non-flush mounting of the sensor and actuator.
min. typical
–
ar
– 15 mm
10 mm
ao
0.5 mm 2 mm
–
ar
– 12 mm
8 mm
ao
0.4 mm 1.6 mm
via evaluation unit
permanently sealed connection
cable, with wire end ferrules
–
Plug connector M8 (with snap-in/
screw connection), 3-pole
–
Plug connector M8 (with snap-in/
screw connection), 3-pole
–
Operating Instructions
T4000
Value
max.
– 32 mm
–
– –
–
– 32 mm
–
– –
–
– 15 m
– 50 m
– 50 m
8009704/US09/2010-12-20