Propeller Change - Reely Phonix Plus Mode D'emploi

11.

Propeller change

Remove the spinner (1), by turning it counter-clockwise (viewed from the rear in the flight direction). Use suitable tools
for this (e.g. a small screwdriver) that you push into the hole at the tip of the spinner.
Remove the old propeller (2) and remount on the new propeller onto the propeller tappet (3) so that the motor turning
clockwise produces thrust towards the tail unit (viewed from the rear in the flight direction.
Attach the propeller on the propeller tappet by turning on the spinner clockwise again (viewed from the rear in flight
direction).
Figure 18
51