Inserting And Connecting The Flight Battery - Reely Phonix Plus Mode D'emploi

d) Inserting and Connecting the Flight Battery
Figure 8 shows the position of the elevator servo (1), the flight controller (2), the plug-in system (3) between flight
battery and flight controller, the flight battery (4), the rudder servo (5) and the installation site of the receiver at the
side of the fuselage (6).
The cabin hood (7) is held on the fuselage by a latching device (8). After removing the canopy, the flight battery is
pushed into the fuselage from the front and secured with hook-and-loop tape in the front area of the fuselage tip. The
flight battery must not move in flight.
The required position of the flight battery is determined by the centre of gravity.
Figure 8
43