Setting The Rudder Deflections - Reely Phonix Plus Mode D'emploi

g) Setting the Rudder Deflections
If the construction is performed and the transmitter set correctly, the rudders should have the following rudder deflec-
tion values:
Aileron
Elevator rudder
Rudder
Attention!
The indicated values show the rudder deflections to be selected for the first flights.
Adjust the deflections to your personal preferences after a familiarisation period.
The enclosed remote control system does not permit setting of the servo paths at the transmitter and thus
the rudder deflections at the model as more expensive computer-based remote control systems do. To
change the rudder deflections, the values are set by repositioning the push rods on the servo arms or the
flaps.
48
12 mm upwards
12 mm upwards
20 mm to the left
12 mm downwards
12 mm downwards
20 mm to the right