Miller Dynasty 200 DX Manuel De L'utilisateur page 45

Masquer les pouces Voir aussi pour Dynasty 200 DX:
Table des Matières

Publicité

Sélectionner GEN
B.
Current (A)
Start Time
20 ms
Current (A)
Start Time
1 ms
2
GEn
GEN Default AC TIG Start Parameter Relationships
Start Slope Time
10 ms
GEN Default DC TIG Start Parameter Relationships
Start Slope Time
40 ms
1
Encoder Control
2
Amps Meter
3
Amperage Switch Pad
If [GEn] is selected and displayed
1
on the amps meter, the TIG starting
parameters for a .094 tungsten are
the default, and for AC polarity they
are: Start Polarity = EP, Start Am-
perage = 120 A, Start Time = 20 ms,
Start Slope Time = 10 ms, Preset
Minimum Amps = 5 A. For DC polar-
ity they are: Start Polarity = EN,
3
Start Amperage = 60 A, Start Time
= 1 ms, Start Slope Time = 40 ms,
Preset Minimum Amps = 3 A.
These parameters can be manually
changed by pressing the Amper-
age switch pad to step through
each adjustable parameter. To
change parameters, see Sections
C, D, E, F, and G.
Preset Amperage Minimum
5 Amps
Preset Amperage Minimum
3 Amps
OM-245 730 Page 37

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ce

Table des Matières