KTM Power Parts 61412927033 Mode D'emploi page 6

6
- Position back plate (included).
- Mount sliding bushings, rubber washers and nuts (see fi gure, top
right) of the assembly kit
Mounting of Top Case back plate (Top Case 48l scope of supply)
- Remove front sliding bushings, rubber washers and nuts of assembly
kit .
- Position Top Case back plate
- Mount screws (included) but do not tighten them yet.
- Mount screws (included) with sliding bushings, rubber washers
and nuts (see fi gure, top right) of assembly kit
- Tighten screws to 10 Nm.
Final assembly for back plate
- Press the side covers in area
slip into area .
- Position suitcase brackets.
- Mount and tighten screws
Final steps
- Install the passenger seat (see the Owner's Manual).
(included) and tighten to 10 Nm.
.
and tighten to 10 Nm.
and with Top Case back plate
into the bracket catch fi rst and then
.