Télécharger Imprimer la page

Güde GSF 1700-6,5 PS Mode D'emploi Original page 21

Masquer les pouces Voir aussi pour GSF 1700-6,5 PS:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
6
Operation
6.1
Speed Range Gearing # 94578
Fig. 11
6.2
Snow Chains (to be bought optionally)
In extreme weather conditions, it is possible to buy snow chains in a specialised shop and use the. Our
ordering No. is 94579 and it will fit ordering No. # 94578.
6.3
Operator Safety Instructions
There is a risk of injury when working on slopes in result of the unit tilting.
Work slowly and with care, particularly when changing the direction of advance.
Drive the unit on the scope vertically up or down, not across the scope.
Use the scope only after having read the operating manual carefully.
Observe all the safety instructions contained in the manual.
Be responsible to the others.
6.4
Step-by step Instructions
Remove any foreign objects from the area to be cleaned.
Start the engine according to the description in the manual.
Direct the ejection at the free area.
Work on the area to be cleaned slowly and evenly.
7
Troubles- Causes- Troubleshooting
Trouble
Cause
1.
2.
3.
Engine will not
start
4.
5.
6.
1.
Unit will not throw
the snow off
Empty fuel tank (Fig. 1/Pos. 12 and Fig.
2+3/Pos. 19).
Cold engine, the choke (Fig. 1/Pos. 16 and
Fig. 2+3/Pos. 9) not in ON position.
The ignition clutch (Fig. 1/Pos. 19 and Fig.
2+3/Pos. 23) not pulled on.
Dirty or defective clutch socket (Fig. 1/Pos.
19 and Fig. 2+3/Pos. 23).
Polluted air filter.
Oversaturated carburettor.
Clogged worm (Fig. 1/Pos. 8 a Fig.
2+3/Pos. 13) or ejection (Fig. 1/Pos. 9 and
Fig. 2+3/Pos. 11).
Before gearing or changing the gear, release the wheel
driving clutch lever. Gear the speed stage with the
gearing lever
Forward : 1-5
Backward R1-R2
Troubleshooting
1.
Fill the tank (Fig. 1/Pos. 12 and Fig. 2+3/Pos.
19).
2.
Put the choke č (Fig. 1/Pos. 16 and Fig.
2+3/Pos. 9) in ON position and try to restart. .
3.
Pull the socket on ignition cutch.
4.
Clean the ignition clutch (Fig. 1/Pos. 19 and
Fig. 2+3/Pos. 23) replace it (Fig. 1/Pos. 19 and
Fig. 2+3/Pos. 23) if defective.
5.
Clean the air filter. .
6.
Put the choke (Fig. 1/Pos. 16 and Fig. 2+3/Pos.
9) in OFF position and start
1.
Clean the unit – remove clogging.
21
GB

Publicité

loading

Ce manuel est également adapté pour:

94578