Auto Line-Up - Ultraflex UFLEX MTT12 Manuel D'installation Et D'entretien

4.3.2 Auto line-up

When running at idle or when the engine turns off, the auto line-up function allows putting the tabs in rest
position automatically.
The auto line-up function can be enabled by means of the panel key or the neutral safety switch of the
control unit.
Engine key:
Single engine
Twin engine
THE FOLLOWING WIRING KIT CAN BE USED
ORANGE - AWG 18
BLACK/ORANGE
- AWG 18
WHITE/ORANGE - AWG 18
ORANGE - AWG 18
BLACK/ORANGE - AWG 18
WHITE/ORANGE - AWG 18
ORANGE - AWG 18
BLACK/ORANGE - AWG 18
WHITE/ORANGE - AWG 18
NOT CONNECTED
NOT CONNECTED
Installation and maintenance manual
ENGINE KEY
NOT CONNECTED
THE DIODES ARE NOT INCLUDED IN
NOT CONNECTED
THE PACKAGING.
THEY MUST BE PROVIDED BY THE
SUPPLIER.
THEIR MINIMUM REQUIREMENTS ARE:
Id > 1A
Vbd > 30V
(NOT SUPPLIED)
NOT CONNECTED
KIT 42376L
(OPTIONAL)
ELECTROMECHANICAL TRIM TABS
PORT ENGINE KEY
STARBOARD ENGINE KEY
PORT ENGINE KEY
STARBOARD ENGINE KEY
page 19
- of 83