To Connect Additional Devices To The Hp Laserjet 3015 All-In-One And The Hp Laserjet 3030 All-In-One - HP LaserJet 3015 Mode D'emploi

To connect additional devices to the HP LaserJet 3015 all-in-
one and the HP LaserJet 3030 all-in-one
Connect additional devices in the order that is described in the following steps. The output
port for each device is connected to the input port of the next, forming a "chain". If you do
not want to connect a specified device, skip the step that explains it and continue to the
next device.
Do not connect more than three devices to the telephone line.
Note
1. Unplug the power cords for all the devices that you want to connect.
2. If you have not yet connected your device to a telephone line, see
3. Locate the fax ports on the back of the device.
4. Remove the plastic insert from the "telephone" port (the port that is marked with a
16 Chapter 1 Fax Setup
device to a telephone line
to a telephone jack.
telephone icon).
before proceeding. The device should already be connected
Connecting the
ENWW