Changing The Rings-To-Answer Setting; Using The Rings-To-Answer Setting; To Set The Number Of Rings-To-Answer - HP LaserJet 3015 Mode D'emploi

Changing the rings-to-answer setting

When the answer mode is set to Automatic, the device rings-to-answer setting determines
the number of times the telephone rings before the device answers an incoming call.
If the device is connected to a line that receives both fax and voice calls (a shared line) and
that also uses an answering machine, you might need to adjust the rings-to-answer setting.
The number of rings-to-answer for the device must be greater than the rings-to-answer on
the answering machine. This allows the answering machine to answer the incoming call and
record a message if it is a voice call. When the answering machine answers the call, the
device listens to the call and automatically answers it if it detects fax tones.
The default setting for rings-to-answer is five for the U.S. and Canada, and two for other
countries/regions.

Using the rings-to-answer setting

Use the following table to determine the number of rings-to-answer to use.
Type of telephone line
Dedicated fax line (receiving only fax calls)
One line with two separate numbers and a ring-
pattern service
Shared line (receiving both fax and voice calls)
with only an attached telephone
Shared line (receiving both fax and voice calls)
with an attached answering machine or
computer voicemail

To set the number of rings-to-answer

To set or change the number of rings-to-answer, use the following steps:
1. On the control panel, press
2. Use the
3. Use the
4. Use the
5. Use the alphanumeric buttons to enter the number of rings-to-answer, and then press
MENU
ENWW
MENU
< or the > button to select Fax setup, and then press
< or the > button to select Fax Recv. setup, and then press
< or the > button to select Rings to answer, and then press
/ .
ENTER
Recommended rings-to-answer setting
Set to a number of rings within the range
displayed on the control panel. (The minimum
and maximum number of rings allowed varies by
country/region.)
One or two rings. (If you have an answering
machine or computer voicemail for the other
telephone number, make sure the device is set
to a greater number of rings than the answering
system. Also, see
answering.)
Five rings or more.
Two rings more than the answering machine or
computer voicemail.
/ .
ENTER
Changing the rings-to-answer setting
Changing ring patterns for call
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
43