Changing The Default Glass-Size Setting; To Change The Default Glass-Size Setting - HP LaserJet 3015 Mode D'emploi

Changing the default glass-size setting

This feature is not available with the HP LaserJet 3015 all-in-one.
Note
This setting determines what paper size the flatbed scanner scans when you send a fax
from the scanner. The factory-set default is determined by the region/country in which you
purchased the device.

To change the default glass-size setting

1. Press
2. Use the
3. Use the
4. Use the
5. Use the
6. Press
The following glass-size settings are available:
●
●
36 Chapter 2 Faxing (basic)
/ .
MENU ENTER
< or the > button to select Fax setup, and then press
< or the > button to select Fax Send setup, and then press
< or the > button to select Def. Glass Size, and then press
< or the > button to select the correct paper size setting.
/ to save your selection.
MENU ENTER
HP LaserJet 3030 all-in-one: A4 or Letter
HP LaserJet 3380 all-in-one: A4, Letter, or Legal
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
ENWW