To Connect Additional Devices To The Hp Laserjet 3380 All-In-One - HP LaserJet 3015 Mode D'emploi

8. To connect a telephone, plug a telephone cord into the previous device's "telephone"
9. After you have finished connecting additional devices, plug all of the devices into their
To connect additional devices to the HP LaserJet 3380 all-in-
one
Connect additional devices in the order that is described in the following steps. The output
port for each device is connected to the input port of the next, forming a "chain". If you do
not want to connect a specific device, skip the step that explains it and continue to the next
device.
Do not connect more than three devices to the telephone line.
Note
1. Unplug the power cords for all the devices that you want to connect.
2. If you have not yet connected your device to a telephone line, see
3. Open the print-cartridge door, and then open the left side panel to reveal the fax ports.
4. Remove the plastic insert from the "telephone" port (the port that is marked with the
18 Chapter 1 Fax Setup
port. Plug the other end of the telephone cord into the telephone "line" port.
power sources.
device to a telephone line
to a telephone jack.
telephone icon).
before proceeding. The device should already be connected
Connecting the
ENWW