Bartscher BETA AC 433V0 Mode D'emploi page 39

NOTE!
If further settings are adjusted by pressing one of the buttons within 15 seconds,
the device will immediately accept the previously entered values.
Entering values is complete, the values set will be displayed on the corresponding
indicators.
The program indicator will remain in the MA position and not flash, unless the program
button P is pressed to start the programming function.
While cooking, the settings can be changed by pressing the appropriate button
- +
(temperature, time, steam) and then the buttons „ " or „ ". To confirm the changed
settings, press the corresponding button or wait 15 seconds until the adjusted values are
saved.
If the device is placed in STOP mode and no action is taken within 15 minutes, the
device will automatically switch off the same as if the ON/OFF button is pressed.
The ON/OFF button is not active while cooking. To activate it, first press START/STOP.
The settings entered will remain in the device's memory for 5 minutes after cooking time
has expired or if the device is turned off by the ON/OFF button.
The device will return to its startup sequence 5 minutes after being turned off, and when
the MA function is activated (manual operation).
- 37 -