Bartscher BETA AC 433V0 Mode D'emploi page 43

Program button (program phase / stage indicator)
Programs
The device can store 20 programs with six stages
(phases) each.
Entering a program
P.
Press the program button The program indicator
will flash. Select the program to be saved or
- +
changed using the buttons „ " or „ ".
To confirm, wait 15 seconds or press the program
P
button .
To save a program with a larger number of phases
(program stages), press F and set the phase using
+
the button „ " to 1 (first phase/program stage).
F and
Next, enter all desired settings then press
+
„ " again to move to the second phase.
When all settings for all phases have been entered,
P
press to confirm the settings.
Manual setup
-
To return to manual operation, press the buttons „
+
MA
" or „ " until the program indicator reads .
P
Confirm using the program button or wait 15
seconds.
Temporary change
During the cooking cycle, previously entered values can be changed by pressing the
temperature, time or steam buttons. The saved values in the start program will not be
changed.
- 41 -