Bartscher BETA AC 433V0 Mode D'emploi page 40

START/STOP button
By pressing the START/STOP button, the
cooking time begins and the internal lighting
comes on.
The temperature indicator will switch from
displaying the set temperature to the actual
temperature in the cooking compartment.
The corresponding LED indicator will
remain lit up until the desired value is
reached, go off if this value is exceeded,
and come on if the value has not yet been
reached.
The time indicator will count down, and the
corresponding LED indicator will flash. After
time has expired the LED indicator will shine
without interruption.
The steam indicator displays without
interruption the entered value, and the
corresponding LED indicator will come on if
spraying is activated.
The program indicator will continue to
display MA (manual operation), or if a
program is selected it will display the number
and stage of the program if the stage has
been set.
If the START/STOP button is pressed
during cooking, the cooking process will be
suspended. All settings entered will be
remembered. The cooking time will resume
where it was interrupted. If the
START/STOP is pressed again, the
cooking process will resume and the
settings will be remembered.
After cooking time expires a signal will
sound for 10 seconds or until the doors are
opened, and the device will go into OFF
mode.
Opening the doors during cooking has the
same effect as pressing START/STOP.
Closing the doors will cause the device to
automatically resume functioning.
- 38 -