Bartscher BETA AC 433V0 Mode D'emploi page 38

Button functions
ON/OFF
If the device is connected to electricity, the
program name will be displayed for a few
seconds on the screen. The device will then
enter into STANDBY mode and the ON/OFF
button will light up. The device will wait for
further instructions.
By pressing the ON/OFF button the device will
turn on and all indicators on the display will light
up. The temperature indicator will flash. The
following initial settings will be displayed:
Temperature- initial setting 100 ° C
Time- initial setting 000
Steam- initial setting 00 %
Program- initial setting MA
MA
( – manual mode)
Desired settings can now be entered.
Set the desired temperature using the buttons „
+
" or „ ". The temperature indicator will flash for
15 seconds, then accept the value entered. This
value will be displayed on the temperature
indicator.
The time indicator flashes.
The desired cooking time can be set using the
- +
buttons „ " or „ ". The temperature indicator
will flash for 15 seconds, then accept the value
entered. This value will be displayed on the time
indicator.
The steam indicator flashes.
Now the steam power can be set using the
- +
buttons „ " or „ ". After entering the desired
value the steam indicator will flash for 15
seconds, then accept the value entered if no
other settings are changed.
- 36 -
-