Activity
Send in the machine to
HONSEL Service, see
chapter 5.4
Replace threaded
mandrel / threaded
sleeve
Replace nosepiece
5 .4
HAVE WORK CARRIED OUT BY
HONSEL SERVICE
1. Call up the Service check-in on our website
www.honsel.de/en/service/werkzeug-service/
tools-fuer-tools/online-check-in.
2. Follow the instructions on the website.
3. Send the tool to the following address:
HONSEL Distribution GmbH & Co.
Friedrich-Wöhler-Str. 44
24536 Neumünster
GERMANY
50 | English
Frequency
Every 300,000 set
fasteners or every
24 months
In the case of visible
wear or visible
damage, but at the
latest after 7,500 set
fasteners
In the case of wear or
visible damage, but at
the latest after 30,000
set fasteners
6 Transport / storage
Transport instructions:
•
Keep the machine in the original packaging
during transport.
•
Before changing the working location, check
that the working temperature range specified in
the technical data can still be maintained, see
chapter 2.11.
Storage instructions:
•
Keep the machine in the original packaging
during storage.
•
Do not store the machine outdoors.
7 Decommissioning / disposal
7 .1
DECOMMISSIONING
Precondition:
•
The machine is not to be used for several
months.
1. Store the machine in the original packaging.
2. Before using the machine again, perform all
the maintenance operations described in the
maintenance schedule, see chapter 5.3.
7 .2
DISPOSAL
Used batteries can be returned to HONSEL or
handed in to authorised collection points.
ATTENTION
Improper disposal of environ-
mentally hazardous substances
Environmental damage
•
Observe the disposal
instructions on the safety data
sheets of the process media
used.
•
Observe all national and
regional laws and regulations
concerning waste disposal.