Safety Symbols On The Machine; Type Plate / Serial Number; Setting Tool; Battery - Honsel Rivdom eVNG 2 Manuel D'utilisation

WARNING
Unqualified operators
Serious injuries or material damage
• Keep unqualified persons away
from the work area.
• Have all work steps performed
only by qualified persons.
WARNING
Parts flying out of the machine
Serious injuries or material damage
• Do not point the machine
towards persons.
• Disconnect the machine
from the power supply before
changing tools or accessories.
• Clamp the workpiece securely
before starting work.
1 .5 SAFETY SYMBOLS ON THE
MACHINE
These safety symbols can be found on the type
plate of the setting tool, the battery and the
charger, see chapter 1.6.
Read and observe the information
in the operating manual before
operating the machine.
Do not dispose of in household
waste.
These safety symbols can also be found on the
type plate of the battery.
Protect from moisture.
Protect from fire.
1 .6

TYPE PLATE / SERIAL NUMBER

1 .6 .1 Setting tool

Serial number
The serial number is located on the bottom of
the tool next to the thread for the belt clip / rivet
application plate.
The first 2 digits of the serial number stand for the
year of production.
The 3rd and 4th digits of the serial number stand
for the calendar week of production.
The serial number of the setting tool
can also be displayed on the screen
via the Service Menu by selecting
About, see chapter 3.6.
Type plate
The type plate is located on the label of the tool
(see figure a, item 9).

1 .6 .2 Battery

The type plate and serial number are located on
the underside of the battery.

1 .6 .3 Charger

The type plate and serial number are located on
the underside of the charger.
English | 33