KLS Martin group MedLED Chrome Mode D'emploi page 40

Designation
Adjust the light beam using the pivot joints (⑦).
Adjust the beam and spot size on the lamp body (⑧).
Do not cover the lamp body (⑧) while in use (with a
cloth or other object), as it can get very hot.
Check the LEDs of the battery status indicator, see
section 4.3.2 "Batteries", page 41.
• We recommend connecting the headlight to the charging unit while it is not in use.
• To disconnect the mains cable, always pull on the plug and not the cable.
• If the device is to be stored for more than two weeks, remove the batteries and place them in the
original packaging.
• When using the lamp in dental medicine: A yellow filter can be used to avoid premature polymerization
of composite material.
40
Picture
Headlight MedLED® Chrome
Instructions for Use
Revision 01